Rough Country 6″ Long Arm Susp Lift Kit for Jeep Wrangler Unlimited LJ 04-06

## Product Summary

| Field | Details |
|—|—|
| Brand | Rough Country |
| Part Number / MPN | 63122 |
| SKU | RC63122 |
| Product | 6″ Long-Arm Suspension Lift Kit |
| Vehicle | Jeep Wrangler TJ Unlimited |
| Fitment Years | 2004–2006 |
| Drivetrain | 4WD |
| Lift Height | 6″ |
| Suspension Type | Long-arm / high-flex |
| Position | Front & Rear |
| Shocks | Rough Country N3 Shocks |
| Warranty | Lifetime Replacement Warranty |
| Country of Origin | United States |

## Confirmed Fitment

| Year | Vehicle | Trim / Model | Engine |
|—|—|—|—|
| 2004 | Jeep Wrangler TJ Unlimited | Rubicon | 4.0L I6 |
| 2004 | Jeep Wrangler TJ Unlimited | Sahara | 4.0L I6 |
| 2004 | Jeep Wrangler TJ Unlimited | Sport | 4.0L I6 |
| 2004 | Jeep Wrangler TJ Unlimited | SE | 2.4L I4 |
| 2005 | Jeep Wrangler TJ Unlimited | Rubicon | 4.0L I6 |
| 2005 | Jeep Wrangler TJ Unlimited | Sport | 4.0L I6 |
| 2005 | Jeep Wrangler TJ Unlimited | SE | 2.4L I4 |
| 2006 | Jeep Wrangler TJ Unlimited | Unlimited Rubicon | 4.0L I6 |
| 2006 | Jeep Wrangler TJ Unlimited | Unlimited Sport | 4.0L I6 |

**Important:** The detailed seller description specifically states **“Fits Unlimited models ONLY”** and the final fitment statement is **2004–2006 4WD Jeep Wrangler TJ Unlimited**. Therefore, do **not** assume this kit fits a standard 2-door TJ that is not an Unlimited.

## Front Components

| Component | Included |
|—|—|
| High-flex coil springs | Yes |
| Upper adjustable control arms | Yes |
| Lower adjustable control arms | Yes |
| Control-arm mounting brackets | Yes |
| Bump-stop extensions | Yes |
| Sway-bar quick disconnects | Yes |
| Forged adjustable track bar | Yes |
| Track-bar drop bracket | Yes |
| Pitman arm | Yes |
| Stainless-steel braided brake lines | Yes |
| Hardware | Yes |

## Rear Components

| Component | Included |
|—|—|
| High-flex coil springs | Yes |
| Upper adjustable control arms | Yes |
| Lower adjustable control arms | Yes |
| Extended sway-bar links | Yes |
| Forged adjustable track bar | Yes |
| Stainless-steel braided brake line | Yes |
| Bump-stop extensions | Yes |
| Hardware | Yes |

## Key Features

– 6-inch suspension lift.
– Long-arm design for increased suspension travel and articulation.
– High-clearance adjustable control arms.
– X-Flex joints with rebuildable, greasable flex joints.
– Upper joints pivot up to 20°.
– Lower joints pivot up to 35°.
– Front and rear forged-steel adjustable track bars.
– OEM-style rubber bushings.
– Sway-bar disconnects.
– Rough Country N3 shocks.
– Increased ground clearance.

## Installation & Driveline Notes

– Estimated installation time: **8–9 hours**.
– A **Slip Yoke Eliminator (SYE) with CV driveshaft** is recommended to help prevent driveline vibration.
– **Rubicon models:** an SYE or transfer-case drop is not required, but a CV driveshaft is still recommended.
– The exhaust must be **cut and rerouted** to provide clearance from moving suspension components.

## Tire/Wheel Information

| Tire | Wheel | Offset | Requirement |
|—|—|—:|—|
| 35×12.50R20 | 20×10 | -19 | Minor trimming |
| 295/60R20 | 20×10 | -19 | Minor trimming |
| 35×12.50R20 | 20×10 | -18 | Minor trimming |
| 295/60R20 | 20×10 | -18 | Minor trimming |

## Answer

**Rough Country 63122 is a 6-inch Long-Arm Lift Kit specifically for 2004–2006 Jeep Wrangler TJ Unlimited 4WD models.**

It is a comprehensive front-and-rear suspension system with **high-flex coil springs, adjustable long arms, X-Flex joints, forged adjustable front/rear track bars, sway-bar components, brake lines, bump-stop extensions, mounting brackets, a pitman arm, and N3 shocks**.

The most important compatibility point is that **this kit is for the TJ Unlimited only**. If the Jeep is a standard/non-Unlimited TJ, this is **not the correct fitment based on the seller’s description**.

For an eligible **2004–2006 TJ Unlimited 4WD**, the kit provides a **6-inch lift** and is designed around increased articulation and off-road suspension travel. A CV driveshaft is recommended, and exhaust modification is required during installation.